Siemens SINUMERIK Commissioning Manual page 101

• General display machine data
• Channel-specific display machine data
• Machine data for SIMODRIVE drives (powerline)
• Machine data for SINAMICS drives, for Control Units, I/O modules and infeed
Example
Creating user view TEST01:
1. Select "New View". An empty window is opened in order to insert the appropriate
2. In order to insert a comment, select "Insert Text...", and enter a text, for example, "text
3. In order to insert a machine data, select "Insert Data...". Select the machine data area,
4. Mark machine data 32 000. In order to transfer the machine data into the user view, press
5. For additional machine data, proceed in the same way or user "Search": Within a range of
6. In order to complete the selection, press the softkey "<<" to return to the window "Edit
Result:
Figure 3-2
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
machine data and comment lines.
line 1". Acknowledge using the <INPUT> key in order to accept the text.
e.g. "Axis-specific machine data". The corresponding range of numbers 30 000 - 38 000
is displayed in the list:
the softkey "Insert before/after line".
numbers, you can also mark and insert a machine data directly using "Search".
View".
Example: User view
Parameterizing machine data
3.1 Handling machine data via the HMI
95