Siemens SINUMERIK Commissioning Manual page 521

Permissible file names
The file names are defined as follows:
Alsc.txt
Almc.txt
Aluc.txt
Format of a text entry
Syntax
Description
Parameter
Parameters 2 and 3 are separated by blanks and act as control characters for alarm text
output. To ensure that the text format is identical to that of the alarm texts, these two
parameters must always be set to 0.
The following control characters may be inserted in text:
%n
%@x
Examples:
85000 0 0
85001 0 0
85002 0 0
85003 0 0
Expanding the user interface
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
Contains the language-dependent texts for the Siemens standard cycles
Contains the language-dependent texts for the manufacturer cycles
Language-dependent user texts
8xxxx 0 0 "Text"
Assignment between text number and text in the file
xxxx 5000 to 9899
"text"
Line break
Axis name of axis x (x is the axis number); HMI Embedded sl only
Show axis names (HMI Embedded sl and HMI Advanced):
NC access to corresponding machine data element containing the relevant axis
name; text assembly by means of the string functions it contains.
"Retraction plane"
"Drilling depth"
"Pitch"
"Pocket radius"
Configuring environment
6.2 Creating configuration data
Text identification number range reserved
for users. You must assign unique
numbers.
Text that appears in dialog
6-7