Siemens SINUMERIK Commissioning Manual page 232

Tool management
6.2 Settings in the configuration file
; 0: Do not position,
; 1: Ask the operator whether to position,
; 2: Always position (default setting)
5_FindSoftkeyText = F5SK ; "Load identifier"
5_FindResultHeadlineText = R5HL
; "Load list for all tools with load identifier"
5_FindCondition = TC_TP8 && 2048
; (LoadIdentifier=bit12 (2 to the power of (12-1)=2048)
5_FindResultAddColumnBtss = <empty>
5_FindResultAddColumnText = <empty> ; or R5AddCol
5_FindResultAddColumnDisplayedNumberOfCharacters=0
5_FindLimitedToCurMagazine=False
; "True", "False" (default) restricted to current magazine
; if called via magazine list.
5_ResultListType =1
; 0 = Standard list (default setting), 1 = loading list
6_FindSoftkeyText = F6SK ; "Unload identifier"
6_FindResultHeadlineText = R6HL
; "Unload list for all tools with unload identifier"
6_FindCondition = TC_TP8 && 1024
; (UnloadIdentifier=bit11 (2 to the power of (11-1)=1024)
6_FindResultAddColumnBtss = <empty>
6_FindResultAddColumnText = <empty> ; or R6AddCol
6_FindResultAddColumnDisplayedNumberOfCharacters=0
6_FindLimitedToCurMagazine=False
; "True", "False" (default); restricted to current magazine
; if called via magazine list.
6_ResultListType =0
; 0 = Standard list (default setting), 1 = loading list
[ShortcutSoftkeysForMagSelect]
; Definition of shortcut softkeys for up to 5 favorite magazines
; per TOA, evaluated if section "[GeneralSettingsForMagAndToolList]"
; entry "MagListMagSelectSoftkey=SelectMag" is set.
; This helps to prevent users from excessive use of "magazine +"
; and "magazine -" softkeys, if a lot of magazines are available.
; You can define up to 5 shortcut softkeys for favorite magazines.
; It is possible to use a shortcut softkey for different magazines,
; if the magazines are in different TOAs.
; Syntax: "magIdent = ShortKeyNumber, AutoReturn"
; Examples: turret15=3,NoAuto<< chain50 =1,Auto<<
; Meaning:
; "magIdent": magazine ident like in $TC_MAP2 or in
; magazine configuration in application maintenance tool
; management.
; "ShortKeyNumber": Number of shortcut, value 1 to 5
; "AutoReturn": stay in magazine selection state or return
226
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
HMI Advanced (IM4)