Siemens SINUMERIK Commissioning Manual page 153

5.4.3 Example: How to upgrade a PLC
Procedure
In the following example, data blocks DB3, DB67 and DB111 are not to be overwritten.
1. As back-up, create a series commissioning archive of the PLC data.
2. Create a descriptive file with the following contents:
3. Save the descriptive file as TEST1.INI and save in the directory ..\dh\arc.dir of the control
4. Select the descriptive file TEST1.INI and the series commissioning archive to upgrade
5. Press "Start": While copying, the text message is output from the INI file.
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
;Message= designed by XXX (SIEMENS AG Erlangen)
DB3[3-78]
DB67 ; DB67 complete
DB 3 [79]
DB3[2]
DB111 ; DB111 complete
that is to be upgraded.
the control. The syntax is checked.
Figure 5-6 Start PLC upgrade
Diagnostics and service
5.4 Setting-up and upgrading the system
147