Siemens SINUMERIK Commissioning Manual page 102

Parameterizing machine data
3.1 Handling machine data via the HMI
The following softkeys are available to edit the user view:
1. You can shift lines using the softkeys "Up" or "Down" - correspondingly, lines are deleted
2. Select "Properties" in order to enter descriptive text for the machine data or to modify
3. To save the user view, select "Manage views". Enter a name, e.g. Test01 and accept it
4. In order to display the user view, select "Assign Softkey" and enter a text for the softkey
Note
There are 6 softkeys that can be used to saved user views.
In the "Axis" field it is possible to enter the axis number or select the appropriate axis from
a list.
Axis number or axis name is marked with a "*" in the user view until their assignment
changes.
96
with "Delete line".
existing text. The descriptive text is displayed at the bottom in the info line, e.g. "Channel
name".
using the <INPUT> key.
labeling.
Figure 3-3 Assigning softkeys for direct selection
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
HMI Advanced (IM4)