Siemens SINUMERIK Commissioning Manual page 406

Programming
2.5 Softkey menus
Syntax:
Description:
Parameters:
Note
Enter %n in the softkey text to create a line break.
A maximum of 2 lines of 10 characters each are available in HMI Advanced and 2 lines of 9
characters each in HMI Embedded sl.
Assigning the security level
The operator can only access information on the level for which he is authorized and all
lower levels.
The meanings of the different protection levels are as follows: ac0 is the highest protection
level and ac7 the lowest.
Security level
ac0
ac1
ac2
ac3
ac4
ac5
ac6
ac7
2-56
(Text[, Access level][, Status])
SK =
Define softkey
SK
Text
Display file name
Access level
Status
Locked by
Password
Password
Password
Password
Keylock switch position 3
Keylock switch position 2
Keylock switch position 1
Keylock switch position 0
softkey, e.g., HS1 to HS8, VS1 to VS8
Enter text
"\\my_pic.bmp"
or via separate text file $85199, e.g., with the
following text in the (language-specific) text file:
85100 0 0 "\\c:\pic\my_pic.bmp".
Size of image, which can be displayed on a
softkey:
max. 80 x 34 pixels
ac0 to ac7 (ac7: default)
se1: visible (default)
se2: disabled (gray text)
se3: displayed (last softkey used)
range
Siemens
Machine manufacturer
Service
User
Programmer, machine setter
Qualified operator
Trained operator
Semi-skilled operator
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
Expanding the user interface