Siemens SINUMERIK Commissioning Manual page 467

For dialogs generated with the "Expand user interface" function for the purpose of supporting
user cycles, the information in the dialog descriptive files can be used for this process.
Cycle-specific settings can be made in the configuration to define whether cycles with ;#
lines are to be processed in the parts program or recompiled via the configuration files.
This process can be used to optionally generate the addition of ;# lines required for dialog
support in the parts program for directly noted "old" cycles.
Configuration
The WIZARD.INI file can be stored in the following directories. The directories are browsed
in this sequence:
..\user
..\oem
..\hmi_adv
..\mmc2
The following entries refer to cycle packages, e.g.:
INI_1=bohren.ini
INI_2=drehen.ini
...
INI_n=paket.ini
The information in the [MMC_CycleWizard] section is added so that it is up to date.
Cycle-specific entries in the following format are located in the relevant PAKET.INI files:
[cycleName]
Mname=
Dir=
Dname=
Output
Anzp=
Version=
Code_typ=
Example:
[CYCLE83]
Mname=CYC83
Dir=cst.dir
Output=bohren.ini
Anzp=17
Version=3
Code_typ=0
Expanding the user interface
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
; Name of the cycle as a separate section
; dialog name
Obligatory
; Directory of file with dialog
Obligatory information
; File with dialog information
Obligatory
; Name of the OUTPUT block
Obligatory
; Number of parameters (defined
Obligatory variables)
; Optional cycle version, without entry 0
; Optional output with = 0 or without = 1 ;#
lines
Programming support
3.2 Cycle support
3-3