Siemens SINUMERIK Commissioning Manual page 401

Column properties cannot be read in the LOAD block.
The wr, ac and li attributes can be specified for column definitions.
See also
Dialog elements (Page 2-13)
List of accessible system variables (Page A-7)
2.4.8 Focus control in the table grid
Description
The Row and Col properties can be used to set and calculate the focus within a table:
● Identifier.Row
● Identifier.Col
Programming
Each cell in a table has the Val and Vld properties.
In order to read and write cell properties, a line and column index must be specified in
addition to the variable identifiers from the definition list.
Syntax:
Description:
Syntax:
Description:
Example
Var1[2,3].val=1.203
If the line and column indices are not specified, the indices of the focused cell apply. This
corresponds to:
Var1.Row =2
Var1.Col=3
Var1.val=1.203
Expanding the user interface
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
Identifier[Line index, column index].val or
Identifier[Line index, column index]
Val properties
Identifier[Line index, column index].vld
Vld properties
Programming
2.4 Complex dialog elements
2-51