Siemens SINUMERIK Commissioning Manual page 285

Sinumerik 840di sl/840d sl/840dbase software and hmi advanced
Hide thumbs Also See for SINUMERIK:
Table of Contents

Advertisement

A.5
DGOVW.INI
Overview
This file is used for configuring additional customized signals in the "Diagnostics" → "Service
Displays", "Service Overview" screen. Configured signals are added below the standard
signals in this screen and can be viewed there (scrolling may be required). The file must be
specifically created in one of the following directories: mmc2, addon, oem or user.
[GLOBAL]
; Number of additional signals
NrOfSignals=
; Bitmaps with customized icons to be displayed
[BMP]
100="<Bitmapname>"
101="..."
.
; One section per signal
[SIG1]
text=
Item=
expr=
.
[SIG2]
.
[SIG<n>]
.
DGOVWTXT_xx.INI
The value "xx" in the file name contains the relevant language abbreviation. The file contains
the language-specific texts for customized signals in the service overview. The file must be
created explicitly in the mmc2, user, addon, oem, or ...\language directory.
[TEXT]
; $T<Nr> = "Language-specific text"
; <Nr> stands for values from 1000 to 32767,
; Values below 1000 are reserved, e.g.:
$T1001="Signal s"
For details on configuring and for an example, refer to:
See also
Supplementing service displays on a user-specific basis (Page 36)
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
List of the INI Files
A.5 DGOVW.INI
279

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents