Siemens SINUMERIK Commissioning Manual page 189

Empty location search First location forward / Current location forward
Wear group (wear
group)
Number of locations:
Def. locations:
Real magazines
Name:
Type:
No. of Locations:
Location types
Location type:
From location:
To location:
"Parameters per magazine" softkey:
The settings made in the previous screen ("Magazine configuration") become effective.
Figure 6-12
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
Last location backward / Current location backward
Symmetric current location
Leave tool status unchanged
Actively change tool state
Total number of locations in the configuration (all assigned
magazines)
Total number of locations in the configuration to which a location
type was assigned
Name of the selected real magazine
Type of magazine
Number of locations for the selected magazine
Name of selected location type
1. location to be defined
Last location to be defined
Set parameters for each magazine
6.1 Setting tool management parameters on the HMI
Tool management
183