Siemens SINUMERIK Commissioning Manual page 25

Configuring the HMI system
2.1 Processing INI files
Notation
[xxx]
Identifier=value
Identifier=<empty>
,
;
REM
Directory structure
The system directory structure is organized in such a way that user changes are retained if
the software is upgraded.
● User changes to the original software are made in parallel directories.
● There is a clear separation between standard HMI software and customer-specific
● The "mmc2" and "hmi_adv" directories (and their subdirectories) should be read-only
The diagram below shows the priority sequence. This means that: Entries in the directory to
the right overwrite corresponding entries in directories to the left.
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
enhancements.
directories. They contain the original software supplied. These directories are overwritten
only if the software is upgraded.
;Designating a section
;Value assignment
;Delete value
;Separator (comma) for multiple assignments
;Introduction of comment: As a general rule, comments indicate
the range of values
;Introduction of comment
2
19