Siemens SINUMERIK Commissioning Manual page 233

; automatically to magazine list state Values "NoAuto<<"
; and "Auto<<".
; magazine "turret15" ($TC_MAP2) can be displayed by shortcut 3,
; you must use "<<" softkey explicitly to leave magazine select
; state.
; magazine "chain50" can be displayed by shortcut 1 and there is
; an automatic return to magazine list state after pressing this
; shortcut softkey. To specify softkey text, use section
; "[ShortcutSoftKeysForMagSelect]" in language dependent
; ini files patm_??.ini.
; chain10 = 1, Auto<<
; turret20 = 2, Auto<<
; turret10 = 3, Auto<<
; chain20 = 5, NoAuto<<
; turret15 = 4, NoAuto<<
6.2.3 Configuring the display of softkeys
Softkey texts for the lists
The displays stored behind softkeys 1 to 3 in the magazine and tool lists are defined in the
file paramtm.ini.
As the default setting when tool management is selected, the displays appear that have
been configured for [1_MagList] and [1_ToolList].
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
Tool management
6.2 Settings in the configuration file
227