Siemens SINUMERIK Commissioning Manual page 180

Tool management
6.1 Setting tool management parameters on the HMI
6.1.3 Loading points and loading locations
Loading locations
Loading locations are places that are needed for loading the magazine. There are two types
of loading locations:
● Loading points
● Loading stations
All loading locations are stored in an internal loading magazine with the number 9999.
In this screen, new loading locations are defined or existing ones displayed.
Figure 6-4
Locations
Name
Display text
Number
Type
Index
Number
Overview
174
Start-up: Loading locations
Name of loading location (max. 32 characters).
Language-dependent name of the magazine. If it exists, the display text is
immediately displayed from patm_xx.ini.
Display of the current magazine number
The options are loading point and loading station.
The index counts the locations of a type.
Display of consecutive internal number, under which the location is to be
addressed
The overview displays the number of all buffers graphically. The numbers for the
selected loading point/station are highlighted in color.
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
HMI Advanced (IM4)