Siemens SINUMERIK Commissioning Manual page 70

Configuring the HMI system
2.2 Configuring a channel menu
[param NCU_1]
nck_address=
192.168.214.1,LINE=10,NAME=/NC,SAP=030d,PROFILE=CLT1__CP_L4_INT
plc_address=
192.168.214.1,LINE=10,NAME=/PLC,SAP=0201,PROFILE=CLT1__CP_L4_INT
name=Machine_1
[param NCU_2]
nck_address=
192.168.214.2,LINE=10,NAME=/NC,SAP=030d,PROFILE=CLT1__CP_L4_INT
plc_address=
192.168.214.2,LINE=10,NAME=/PLC,SAP=0201,PROFILE=CLT1__CP_L4_INT
name=Machine_2
[param NCU_3]
nck_address=
192.168.214.3,LINE=10,NAME=/NC,SAP=030d,PROFILE=CLT1__CP_L4_INT
plc_address=
192.168.214.3,LINE=10,NAME=/PLC,SAP=0201,PROFILE=CLT1__CP_L4_INT
name=Machine_3
;***************************
; ChanMenu
;***************************
[chan HMI_1]
DEFAULT_logChanSet = Machine_1
DEFAULT_logChan = NCK1.1
ShowChanMenu = true
logChanSetList = Machine_1, Machine_2, Machine_3
[Machine_1]
logChanList = NCK1.1
[NCK1.1]
logNCName = NCU_1
ChanNum = 1
[Machine_2]
logChanList = NCK2.1
[NCK2.1]
logNCName = NCU_2
ChanNum = 1
[Machine_3]
logChanList = NCK3.1
64
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
HMI Advanced (IM4)