Siemens SINUMERIK Commissioning Manual page 573

File IF.INI
[TECHNOLOGY]
"m" = Milling
"t" = Turning
"g" = Grinding
"s" = Nibbling
"p" = Punching
"a" = Display all technologies
[TEXTFILES]
Siemens = DH\CST.DIR\IFS_GR.COM
Machine manufacturer = DH\CMA.DIR\IFM_GR.COM
Machine manufacturer = DH\CMA.DIR\IFI_GR.COM
End user = DH\CUS.DIR\USER_GR.COM
[CONTEXT]
= 0: Context sensitivity not active
= 1: Context sensitivity active
[TEXTSEARCH]
= 1: Text search for instruction texts only
= 2: Text search for descriptive texts only
= 3: Text search for instruction and descriptive texts
1.2.3 Extension of text files
Categories
These two categories are available in the text files:
• Topic definition
• Instruction definition
The functions below can be entered in the *.COM text files of the help in the specified format:
• Topics as IDs of an instruction grouping
• Instructions with descriptive texts
• Instructions with call for extended help
• Instructions with alarm text variables as descriptive texts
Online Help (HE1)
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
– "PDF" editor help or
– Cycle help on input fields of cycle screens, in which parameters are supplied to the
instruction
Programming help systems
1.2 Quick "ASCII" help
11