Siemens SINUMERIK Commissioning Manual page 289

A.9 HEADER.INI
Overview
User-specific icons and texts are configured in the HEADER.INI file that are output in the
global cross-channel status display (header).
[CondStopIcons]
DefaultIcon=CondWait.bmp ;0 = No wait state
1=CondStop.bmp
2=CondStop.bmp
3=CondStop.bmp
4=CondStop.bmp
5=CondStop.bmp
6=CondStop.bmp
7=CondStop.bmp
8=CondStop.bmp
9=CondStop.bmp
10=CondWait.bmp
11=CondWait.bmp
12=CondStop.bmp
13=CondWait.bmp
14=CondWait.bmp
15=CondWait.bmp
16=CondWait.bmp
17=CondStop.bmp
18=CondStop.bmp
19=CondStop.bmp
20=CondWait.bmp
21=CondWait.bmp
22=CondStop.bmp
23=CondStop.bmp
24=CondWait.bmp
25=CondWait.bmp
26=CondWait.bmp
27=CondWait.bmp
28=CondWait.bmp
29=CondWait.bmp
30=CondWait.bmp
31=CondWait.bmp
32=CondStop.bmp
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
; No NC ready
; No mode group ready
; EMERGENCY STOP active
; Alarm with stop active
; M0/M1 active
; Block in SBL mode terminated
; NC stop active
; Read-in enable missing
; Feed enable missing
; Dwell time active
; Aux. function acknowledgment missing
; Axis enable missing
; Exact stop not reached
; Waiting for positioning axis
; Waiting for spindle
; Waiting for other channel
; Waiting for feedrate override
; Error in NC block
; Waiting for external NC blocks
; Waiting for synchronized action
; Block search active
; Spindle enable missing
;Axis feed override 0
; Waiting for tool change acknowledgment
; Gear step change
; Waiting for position control
; Waiting for thread cut
; Reserved
; Waiting for punching
; Waiting for safe operation
;No channel ready
; Oscillation active
List of the INI Files
A.9 HEADER.INI
283