Siemens SINUMERIK Commissioning Manual page 45

[SIG1]
text= "Measuring system 1 active"
Item= /Nck/MachineAxis/encChoice[u1, <AX>]
expr= if #=1 then BMP=100 else expr2
expr2= if #=0 then BMP=101 else BMP=2
Structure of the DGOVWTXT_XX.INI File
xx in the file name stands for the language abbreviation for the language-specific file.
The only section is the [TEXT] section.
The individual tests are listed here in the form:
$T<Text No.>= "<any text>" listed.
Values from 1000 to 32767 are permitted for <Text-Nr> and may only occur once. Values
below 1000 are reserved for Siemens.
This file has to exist for all languages that are required (language abbreviation as in
MMC.INI).
See also
DGOVW.INI (Page 279)
2.1.10 Setting the Wide Display for OEM applications
Using the Wide Display
The HMI program is displayed on a large screen as "Wide Display" in such a way that an
area for OEM applications remains free in the upper section.
Upper Screen
The area above the output range of the HMI program is identified as the Upper Screen. This
area has a size of 1280 x 254 pixels.
Requirements
To activate the Wide Display function, the following requirements apply:
● Wide Display will only work if the the screen has a resolution of at least 1280 x 1024
● OEM applications that wish to use Wide Display must be regenerated with the current
HMI Advanced (IM4)
Commissioning Manual, 03/2009, 6FC5397-0DP10-3BA0
pixels and the "UpperScreen" function in the REGIE.INI configuration file, section
[UpperScreen] is set to TRUE.
Procedural control stores the start position of the HMI program in the HMI_Start entry in
section [CONTROL] in the MMC.INI file.
OEM package and the expansion of procedural control.
Configuring the HMI system
2.1 Processing INI files
39