Programming Methods; Initializing The System; Using The Multiline Terminal For Programming; Figure 1-2 Electra Elite Ipk Multiline Terminal - NEC Electra Elite IPK Programming Manual

Document Revision 4
___________________________________________________________________________________
2.5
Dial
Keys
___________________________________________________________________________________
1 - 6

Programming Methods

2.5.1

Initializing the System

Turn on the new Key Service Unit (KSU) power supply. After
approximately 30 seconds, the system operates with the system
default values.
2.5.2

Using the Multiline Terminal for Programming

System programming can be performed using a Display Multiline
Terminal that is connected to station port 01 or 02.

Figure 1-2 Electra Elite IPK Multiline Terminal

the offline mode.
Hold Transfer
Key Key
Figure 1-2 Electra Elite IPK Multiline Terminal
Exit
Key
Speaker
Answer
Key
Key
Multiline Terminal Programming
Electra Elite IPK
shows the terminal in
Display (LCD)
Message
Waiting LED
Softkeys
Help
Key
Flexible Line
Keys
Feature
Key
Directory Key
Recall
Key
Message Key
MIC
Key
Conference
Key
Redial
Key