Table 4-7 Note [Digital (2W)/Ip Multiline Terminal] - NEC SL2100 Installation Manual

SL2100
Item
No.
10 Time Before Shift-
ing to Power-Sav-
ing Mode
11 Handsfree Micro-
phone Control
Program
20
12 Forced Intercom
Ring (ICM Call
Type)
15 Caller ID Display
Mode
18 Dialing Record Dis-
play Time
19 DSS Key - Virtual
Extension Mode
24 LCD scroll mode
26 F-Route outgoing
mode from incom-
ing history
27 ACD Monitor for
Business Mode
type1 "DD MMM WWW hh:mmAP" (12H)
4-32
Item
0 = No Shift (Power saving mode off)
1 = 1 minute
2 = 2 minutes
3 = 4 minutes
4 = 8 minutes
5 = 16 minutes
6 = 32 minutes
7 = 64 minutes
0 = Off
1 = On
0 = Disable (Voice)
1 = Enable (Signal)
0 = Name and Number (Both)
1 = Name Preference
2 = Number Preference
0 ~ 64800 seconds
0 = No
1 = Yes
0 = Character
1 = Dot
0 : OFF
1 : ON
0 : OFF
1 : ON

Table 4-7 Note [Digital (2W)/IP Multiline Terminal]

Input Data
Use this option to
control the setting
for Multiline Ter-
minal Handsfree
microphone after
being disconnec-
ted and recon-
nected. If set to
0, the micro-
phone is always
off when the ter-
minal is recon-
nected. If set to
1, the micro-
phone remains in
the same state it
was in when the
terminal is recon-
nected.
Use this option to
enable or disable
Forced Intercom
Ringing. If ena-
bled, incoming In-
tercom calls nor-
mally ring. If disa-
bled, Intercom
calls voice-an-
nounce.
Sets the mode of
a virtual exten-
sion key that ap-
pears on a DSS
console.
ACD Monitor can
be used at any
time.
Clock display mode
Program 20 : System Option Setup
ISSUE 1.0
Description Default Related
Program
0 15-02-18
1
1
0
30
0 99-01-46
0
0
0 41-02-01
41-05-01
41-06-01
41-07-01
15-07-01