D Cordless Dect (Dtl-8R-1); Figure 8-38 Connecting Telephone Cords To The Telephone Jack - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
6.3
8 - 32
Connecting the Telephone Cords
When connecting the telephone cords, observe the following precautions.
Never install telephone wiring during a lightning
storm.
Never touch bare telephone wires or terminals unless
the telephone line has been disconnected at the
network interface.
Use caution when installing or modifying telephone
lines.
To connect the telephone cords:
1. Connect the cord from the telephone jack to the Line In on the D
Cordless DECT.

Figure 8-38 Connecting Telephone Cords to the Telephone Jack

2. Connect a qualified NEC digital Multiline Terminal to the D
DECT.
UNIVERGE SV8100/SV8300
Installing SV8100/SV8300 Cordless Telephones
term
term
Cordless