Figure 3-7 Placing The Base Unit On The Posts Of The Wall Plate; Figure 3-8 Plugging The Ac Adapter Into The Ac Wall Outlet - NEC Dterm Cordless Series Manual

All manuals and user guides at all-guides.com
Issue 1
4. Plug one end of the short telephone cord (locally
supplied) in the LINE jack on the base unit. Plug one
end of the NEC digital Multiline Terminal into the
PHONE jack.
molded channels on the bottom of the wall mount stand.
5. Plug the other end of the short telephone cord into the
modular wall jack in the center of the wall plate.
6. Place the base unit on the posts of the wall plate and
push down until it is firmly seated.
Figure 3-7 Placing the Base Unit on the Posts of the Wall
7. Plug the AC adapter into a standard 120 Vac wall outlet.
Note:

Figure 3-8 Plugging the AC Adapter into the AC Wall Outlet

3 - 6
Place the telephone cords inside the
Plate
Do not use an outlet controlled by a wall switch.
NEC America, Inc.
Installing the Dterm Cordless