Chapter 6 Installing The Sv8100/Sv8300 Blades; Section 1 General Information; Slot Locations - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Installing the SV8100/SV8300 Blades

This chapter contains information to help the technician install the blades

for the UNIVERGE SV8100/SV8300 system. The technician should be

familiar with this section before installing any equipment.

System Hardware Manual

Each CHS2U-US has six slots. In the Controlling Chassis, the

CD-CP00-US (for Key Systems) must be installed in the first slot

(slot 1). The CC-CP00 (for IPS systems) must be installed in the

Slot Locations in the Controlling Chassis:

Slot 1 – dedicated for the CPU

Slots 2~6 – are universal

Slot Locating in the Expansion Chassis:

Slots 1~6 are universal. (i.e., any type of blade can be installed

in these slots).

Show Quick Links

Chapters

Table of Contents

Univerge sv8300