■ Procedure
1. Remove the Main Motor [1].
• 1 Connector [2]
• 3 Screws [3]
1x
[2]
3x
[3]
Removing the Main Drive Unit.
■ Preparation
1. Pull out the cassette.
2. Open the Upper Cover.
3. Take out the cartridge.
4. Remove the Right
Cover." Removing the Right
Cover" on page 117
5. Remove the DC Controller
Controller PCB" on page 125
6. Remove the Upper Cover
Cover Unit" on page 119
7. Remove the Main
Motor."Removing the Main Motor"
on page 131
8. Remove the Fan
1."Removing the Fan1" on page
120
[3]
[1]
[3]
PCB."Removing the DC
Unit." Removing the Upper
5. Parts Replacement and Cleaning
■ Procedure
1. Remove the Harness Guide [1] while avoiding the
harness.
• 1 Screw [2]
• 1 Connector [3]
• 2 Bosses [4]
• 1 Hook [5]
1x
1x
2. Remove the Fan 2 [1].
• 1 Screw [2]
• 2 Claws [3]
1x
2x
[3]
132
[5]
[2]
[1]
[4]
[1]
[3]
[2]