CHAPTER 5 MECHANICAL SYSTEM
4) Slide the reader unit to the left.
5) Remove the 4 screws [5], and detach the
2 grounding plates [6].
6) Disconnect the connector [7].
7) While paying attention to the rib [8], lift
the rear motor drive unit [9] toward the
right to detach.
2.3.3
Removing the Reader Unit
1) Remove the copyboard cover. (See
2.1.1.1 "Removing the Rear Cover")
2) Remove the rear cover (ADF). (ADF;
See 2.8.1.1 "Removing the ADF")
3) Disconnect the 2 connectors [1], and re-
move the harness retainer [2].
5-28
COPYRIGHT © 2001 CANON INC.
Chapter5.p65
CANON imageCLASS D600s/PC1060s/PC1200s/iR1200s REV. 0 SEPT. 2001
28
[11]
[12]
F05-203-05
[2]
[1]
F05-203-06
8/26/01, 3:46 PM