Table of Contents
Advertisement
Chapter 3
2) Remove the Bk developing cylinder drive solenoid [1].
- 1 connector [2]
- 1 screw [3]
3.4.2.3 The former procedure of removing the Bk
Developing Cylinder Drive Solenoid
LBP5000
1) Remove the delivery tray. (page 3-7)Reference[Removing the Delivery
Tray]
2) Remove the rear cover. (page 3-2)Reference[Removing the Rear Cover]
3)
Remove
the
right
cover/right
3)Reference[Removing the Right Cover/Right Cassette Cover]
4) Remove the upper cover. (page 3-5)Reference[Removing the Upper
Cover]
5) Remove the main drive assembly. (page 3-10)Reference[Removing the
Main Drive Assembly]
3.4.2.4 Removing the Bk Developing Cylinder Drive
Solenoid
LBP5000
1) Remove the Bk developing cylinder drive solenoid [1].
- 1 connector [2]
- 1 screw [3]
3.4.3 ETB Unit
3.4.3.1 Preparation for Removing the ETB Unit
LBP5100
1) Remove the delivery tray. (page 3-7)Reference [Removing the Delivery
Tray]
2) Detach the rear cover. (page 3-2)Reference [Removing the Rear Cover]
3) Detach the right cover. (page 3-2)Reference [Removing the Right Cover
/ Right Cassette Cover]
4) Detach the upper cover. (page 3-5)Reference [Removing the Upper
Cover]
5) Detach the left cover. (page 3-4)Reference [Removing the Left Cover /
Left Cassette Cover]
6) Detach the front cover. (page 3-5)Reference [Removing the Front
Cover]
3.4.3.2 Removing the ETB Unit
LBP5100
Be sure to assemble and disassemble the ETB unit while keeping it closed.
1) Detach the right inner cover [1].
3-26
F-3-178
cassette
cover.
(page
F-3-179
- 3 screws [2]
2) Remove the cam [1].
- 1 screw [2]
0011-1024
3-
3) Detach the cable cover [1].
0011-0096
4) Remove the screw [1].
5) Disconnect the 3 connectors [2].
6) Remove the 2 reuse-bands [3].
0015-7585
7) Remove the cam [1].
- 1 screw [2]
0015-7586
F-3-180
F-3-181
F-3-182
F-3-183
Advertisement
Table of Contents
