CHAPTER 4 IMAGE FORMATION SYSTEM
7.12 Separation Claw/Separation Claw Drive Assembly
7.12.1 Removing from the Drum Unit
1) Remove the process unit from the ma-
chine. (See p. 4-54P.)
1.Take care not to break the
separation claw.
2.Take care not to damage the
photosensitive drum.
2) Remove the screw [1], and detach the
cover [2].
3) Remove the two screws [3], and detach
the claw holder [4].
4-84 P
COPYRIGHT © 2000 CANON INC.
[2]
[4]
F04-712-01
2000 2000 2000 2000
CANON iR5000/iR6000 REV.0 JULY 2000
[1]
[3]