Siemens HiPath 3000 Series Service Documentation page 569

Nur für den internen Gebrauch
Special board attachments
DBSAP
●
The DBSAP board is plugged into four socket contacts on the backplane of the expansion
cabinet and fixed with screws.
LUNA2
●
Depending on the system configuration up to three LUNA2 modules can be used in the ba-
sic cabinet and up to four LUNA2 modules can be used in the expansion cabinet. For in-
formation on how to calculate the number of LUNA2 modules required, see the LUNA2
board description.
Push the LUNA2 power supply unit into the slots provided in the lower part of the system
cabinet shelf until you hear a click.
Figure 4-18
The slots for the power supply units must be covered with an outer panel before the system
is started up. The outer panel is fixed onto the shelf with screws (see Figure 4-19 and
Figure 4-20).
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
HiPath 3800 - Installing the LUNA2 Power Supply Unit
inst_h3.fm
Installing HiPath 3000
Installing HiPath 3800
Removal tab
You can insert a screw-
driver here to remove
LUNA2 from the shelf.
4-37