Siemens HiPath 3000 Series Service Documentation page 1040

service.fm
Service
Guided Maintenance
Table 12-7 HiPath 3000 Class B Error Messages
No. HiPath 3000/
5000 Manager E:
Event Log Entry
09-048 !bitslip error on
(TMS2M)
09-049 !bitslip error off
(TMS2M)
09-050 !loss of synchroni-
zation error on
(TMS2M)
09-051 !loss of synchroni-
zation error off
(TMS2M)
09-058 !Self test error on
(SLMO)
09-059 !Self test error off
(SLMO)
12-66
Meaning
A bit slip has oc-
curred on an ISDN
line.
The bit slip on the
ISDN line has been
corrected.
A synchronization
error has occurred.
The synchroniza-
tion error has been
corrected.
Error while self-
testing the speci-
fied SLMO board.
Error while self-
testing the speci-
fied SLMO board
has been correct-
ed.
Required Measures
Check the S line.
2M
If necessary, reload the
board or perform a hard re-
start.
If the error persists, set up
an ISDN trace.
None
Check the S line.
2M
If necessary, reload the
board or perform a hard re-
start.
If the error persists, set up
an ISDN trace.
None
If necessary, replace the
board or change the slot.
None
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch
Note
The problem
may be caused
by asynchro-
nous internal
and external
clock rates.
Data loss possi-
ble/connection
may be terminat-
ed.
The problem
may be caused
by asynchro-
nous internal
and external
clock rates.
Data loss possi-
ble/connection
may be terminat-
ed.