Fcc Compliance; Fcc Rules, Part 15; Fcc Rules, Part 68 - Siemens HiPath 3000 Series Service Documentation

Nur für den internen Gebrauch
2.10.2.1

FCC Compliance

2.10.2.1.1

FCC Rules, Part 15

Each Siemens Enterprise Communications GmbH & Co. KG system discussed in this section,
except HiPath 3350, has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial envi-
ronment. This equipment generates, uses, and can radiate radio frequency energy. If installa-
tion and operation are not in line with the instructions in the manual, this can lead to disruptions
in radio communication. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference at his
own expense.
The HiPath 3350 has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a residential instal-
lation. This equipment generates, uses, and can radiate radio frequency energy. If installation
and handling are incorrect, this can lead to disruptions in radio communication However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
●
Increase the distance between the equipment and receiver.
●
Connect the equipment to an outlet on a circuit different from that to which the receiver is
●
connected.
Consult the dealer or an experienced radio/TV technician for help.
●
2.10.2.1.2

FCC Rules, Part 68

Each Siemens Enterprise Communications GmbH & Co. KG system discussed in this section
complies with FCC Rules, Part 68. A label on the outside back of the cabinet identifies the FCC
registration number, the ringer equivalence number (REN), and other information. If requested,
this information must be given to the telephone company.
Disruption of the Network and T1
For networked systems using 1.544 Megabits per second (Mbps) T1 service, notify the tele-
communication company when the equipment is disconnected from the network. If any
Siemens Enterprise Communications GmbH & Co. KG system discussed in this section dis-
rupts the telephone network, the telecommunication company can discontinue your service
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Technical Specifications and Compliance to HiPath 3000
sysdat.fm
System Data
2-87