Siemens HiPath 3000 Series Service Documentation page 1052

service.fm
Service
Guided Maintenance
Table 12-7 HiPath 3000 Class B Error Messages
No. HiPath 3000/
5000 Manager E:
Event Log Entry
20-017 !int. charg buf
ovflw
20-029 !Forced trunk dis-
connection
20-032 !CDR Mem. alloc.
failed
20-033 !CDR Cache al-
loc. failed
20-034 !CDR Data write
failed
20-035 !CDR Adm. write
failed
20-036 !CDR Data read
failed
12-78
Meaning
Internal call data
memory overflow.
Manual line re-
lease (for U.S.
only).
Advanced call data
memory cannot be
created.
Read cache for
reading out CDR
data cannot be cre-
ated.
Error while writing
CDR data to the
advanced call data
memory.
Error while writing
the administration
structure to the ad-
vanced call data
memory.
Error while reading
CDR data from the
advanced call data
memory.
Required Measures
Read out call data.
If the error persists, check
the call data application in-
terface.
None
System with MMC
●
module: MMC module
is faulty. Replace the
MMC.
HiPath 2000: File sys-
●
tem in flash is full or
faulty.
Perform a hard restart
(normally occurs automati-
cally).
MMC module: If neces-
sary, read out call data via
TFTP. The internal admin-
istration structure is also
corrected, if this is re-
quired.
MMC module: If neces-
sary, read out call data via
TFTP. After this, replace
the MMC module.
Set up a trace using infor-
mation from BLS.
Create a stack dump.
Save a snapshot.
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch
Note
This is caused
by insufficient
system memory
capacity.