Workpoint Clients; Openstage Product Family - Siemens HiPath 3000 Series Service Documentation

wclient.fm

Workpoint Clients

OpenStage Product Family

10.1 OpenStage Product Family
Connection variants
The following connection variants are available for selection for the terminals in HiPath 3000/
5000:
TDM connection
●
CorNet-IP connection (also as gigabit version, Page 10-5)
●
Product family
The following terminals belong to the OpenStage product family for HiPath 3000/5000:
OpenStage TDM: 10 T, 15 T, 20 T, 30 T, 40 T, 60 T, 80 T
●
OpenStage CorNet IP (HFA): 15, 20 E, 20, 20 G, 40, 40 G, 60, 60 G and 80, 80 G
●
Control elements
The following elements and the display guarantee convenient and interactive operation.
3-way navigator: in OpenStage 20.
●
Programmable keys: in OpenStage 30. The function is displayed to the left of the keys on
●
a paper label.
Programmable touch/sensor keys next to the display (illuminated) and a 5-way navigator:
●
in OpenStage 40. The function is displayed to the left of the keys on the display.
Programmable touch/sensor keys next to the display (illuminated) and a TouchGuide: in
●
OpenStage 60, OpenStage 80. The function is displayed to the left of the keys on the dis-
play.
Programmable keys can be used as function keys, speed dialing keys or trunk keys.
The number of available programmable keys can be increased by adding:
OpenStage Key Module 15: in OpenStage 15, OpenStage 30
●
OpenStage Key Module: in OpenStage 40, OpenStage 60, OpenStage 80
●
OpenStage BLF: in OpenStage 30, OpenStage 40
●
10-4
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation