Openstage Accessories; External Power Supply - Siemens HiPath 3000 Series Service Documentation

wclient.fm
Workpoint Clients
OpenStage Product Family
10.1.5

OpenStage Accessories

10.1.5.1

External Power Supply

In case of certain configurations, an external power supply unit is required (see Section 10.1.4).
The AC adapter features two MW6 connectors.
With the additional power supply of the OpenStage BLF, the connection of the power supply
unit depends on the hardware output of the OpenStage BLF:
Caution
7
The power supply unit used for an OpenStage BLF should only be used for this pur-
pose. Using the free jack of the power supply unit to power another terminal or de-
vice is not permitted and can lead to the destruction of the OpenStage BLF.
OpenStage BLF up to an including hardware output S30817-S7406-A101-7/-A103-2:
●
The external power supply unit is connected directly to the OpenStage BLF. The left jack
of the power supply unit labeled "Digital" (Figure 10-19 for the TDM connection variant)
must be connected to the BLF.
OpenStage BLF from hardware output S30817-S7406-A101-8/-A103-3:
●
The OpenStage BLF is powered by the associated terminal. The power supply unit
(Figure 10-18 for CorNet-IP connection variant) should be connected to the terminal.
10-38
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation