Table of Contents
Advertisement
exup.fm
Expanding and Upgrading HiPath 3000
HiPath 3000Expanding
9.1.3.6.2
Installing the LUNA2 Power Supply in PB3000
PB3000 and LUNA2 power supply are supplied in a separate package. Proceed as follows to
install the LUNA2 in the PB3000:
Step
1.
Set the switches for the line voltage and the LUNA2 voltage on the front of the
PB3000 housing to the "Off" position (see Section 9.1.3.1).
2.
Remove the fuse on the rear of the PB3000 housing (see Section 9.1.3.1).
3.
Unplug all of the power and connection cables of the PB3000.
4.
Remove the front panel of the PB3000: to do so, remove the four screws.
5.
Push LUNA2 into the right housing compartment up to the limit stop.
6.
Screw on the front panel of the PB3000: To do so, tighten the four screws.
7.
Connect all of the power and connection cables of the PB3000.
8.
Insert the battery fuse on the rear of the PB3000 housing (see Section 9.1.3.1)
9.
Set the switches for the line voltage and the LUNA2 voltage on the front panel of
the PB3000 to the "On" position (see Section 9.1.3.1).
9-22
Activity
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch
Hide quick links:
Advertisement
Table of Contents
