Table of Contents
Advertisement
Nur für den internen Gebrauch
4.1.5
Installing Boards (Configuration Notes)
Caution
7
Always wear an antistatic wristband when working on the system (especially when
handling boards).
Caution
7
To ensure that the system operates without blocking, you must follow the in-
●
structions in Section 4.1.5.7 concerning PCM highway distribution.
For thermal reasons the IVMNL board may only be installed in the basic cabinet
●
in a HiPath 3800 19-inch cabinet installation.
In order to avoid inactive IVM channels (due to the slow IVM board boot-up), the
●
recommendations on Page 3-101 must be observed.
4.1.5.1
System factory default
According to the sales order, a distinction is made between the following delivery states:
Pre-configured systems
●
–
The system cabinet(s) is/are supplied with customer-specific boards.
–
The current system software (without customer data) is installed.
–
The system has passed the startup test.
Unconfigured systems
●
The system cabinet(s) is/are not supplied with pre-installed boards. Install the boards as
described in the following information.
4.1.5.2
Board Slots in the Basic and Expansion Cabinet
There are nine slots available in the basic cabinet BC (slots 1 to 5 and slots 7 to 10) and thirteen
in the expansion cabinet EC (slots 1 to 6 and slots 8 to 14) for peripheral boards.
The central control board CBSAP has a fixed slot (slot 6, only in the basic cabinet BC).
Depending on your requirements, up to three LUNA2 power supply units can be used in the
basic cabinet BC and up to four in the expansion cabinet EC.
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
inst_h3.fm
Installing HiPath 3000
Installing HiPath 3800
4-31
Hide quick links:
Advertisement
Table of Contents
