Siemens HiPath 3000 Series Service Documentation page 404

boards.fm
Boards for HiPath 3000
Peripheral boards
LED statuses and their meanings
H100 LED (see Figure 3-93): signal processor status
●
Table 3-128
LED status
(on/off)
During Startup and Initialization
Off
Flashing
(250/250 ms)
On
During Operation
Off
Flashing
(250/250 ms)
On
LEDs H0 to H7 (see Figure 3-93): trunk status
●
Table 3-129
LED status
(on/off)
During Operation
Off
On
Flashing
(500/500 ms)
3-272
TMAMF - LED Statuses (H100)
Meaning
–
The DSP (digital signal processor)
is waiting for DID digits
The DSP is being reset
The DSP is idle
Error: the DSP has not yet received
the DID digits.
The MFC-R2 filter is on
TMAMF - LED Statuses (H0 to H7)
Meaning
The trunk is idle; no seizure
The trunk was seized
Trunk out of service (e.g. S1/x
"closed")
Nur für den internen Gebrauch
Action
Replace board.
Action
Check whether the trunk was de-
activated using HiPath 3000/
5000 Manager E or the lockout
switch.
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation