Siemens HiPath 3000 Series Service Documentation page 73

Nur für den internen Gebrauch
Boards for Tie Trunk Traffic
Table 2-16 Tie Trunk Traffic Boards for HiPath 3350
Board Capacity
Name
HXGS3 2 8
STLS2 2 4
STLS4 4 8
1 The system may be configured with two HG 1500 boards if PDM1 is not used.
Options
Table 2-17 Optional Boards for HiPath 3350
Board Capacity
Name
ALUM4 Trunk failure
transfers
ANI4 Analog trunks
GEE12 Number of call
charge receiv-
ers
GEE16 Number of call
charge receiv-
ers
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Coun-
try
1 x x HG 1500 board for connecting the HiPath 3350 system di-
1
(2 ) rectly to a local data network (Ethernet).
2 x - Board for ISDN basic rate access.
Configuration of ISDN trunks, tie trunks, and stations (no
1 x x
feeding) on the same board is possible.
Coun-
try
4 x x Trunk failure transfer; this board transfers loop start
4 - x This board allows calling line identification (caller ID)
4 x - This optional board records the country-specific call
4 x - This optional board records the country-specific call
Type/Description
Type/Description
trunks directly to internal analog stations in the event
of a power failure (note the signaling method used).
in conjunction with TMGL4.
charge pulses (12 kHz) from the trunk.
charge pulses (16 kHz) from the trunk.
sysdat.fm
System Data
HiPath 3000
2-33