General Functions - Siemens HiPath 3000 Series Service Documentation

Nur für den internen Gebrauch
12.4.9.4

General Functions

Opening and closing a trace window
The following options are available for opening and closing trace windows:
Automatic
●
Select the option Show Window for new Application (checkmark visible next to menu item)
in the Trace menu to activate the automatic opening/closure of trace windows when the
relevant application is started/exited. To disable this option, select the entry again. The
checkmark is removed.
Manual
●
If this option is not set, you can open and close the trace windows for the active applica-
tions manually. The Trace menu should be activated for this purpose. The first entries dis-
played are the available trace windows. Open trace windows are checkmarked.
– To open a closed window you must activate the entry. The checkmark is set and the
trace window is opened.
– To close an open window you must reactivate the entry. The checkmark disappears
and the trace window is closed.
Print trace window content
You also have an option that allows you to output the current status of a trace window to the
configured Trace Monitor printer for documentation purposes. For this, select the Print Mes-
sages entry via the System menu or, alternatively, the Context menu (right click in the Trace
window) of the relevant Trace window. The current contents of the trace window are then sent
to the configured printer.
Deleting the contents of the trace window
To delete the contents of a trace window, select the Delete Messages entry via the system
menu or, alternatively, the Context menu (right click in the Trace window) of the relevant Trace
window. The contents are deleted and the window is empty.
Freezing the contents of a trace window
To stop messages scrolling, you can freeze the current status of the trace window display. For
this, select the Stop Window Scrolling entry via the system menu or, alternatively, the Context
menu (right-click in the Trace window) of the relevant Trace window. The contents of the trace
window are frozen. New trace messages are loaded to the buffer, but are no longer displayed.
To disable this option, select the menu item Stop Window Scrolling again. The option is re-
moved and recent messages are displayed.
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
service.fm
Service
Guided Maintenance
12-51