Siemens HiPath 3000 Series Service Documentation page 780

licensing.fm
Licensing
Licensing Scenarios
Note on Replacing the HiPath 3000 Control Board:
>
When the control board has been successfully replaced, the CDB must be trans-
ferred to HiPath 3000. A warning will appear that the MAC address is invalid. All li-
censes become invalid if the CDB is installed. The system goes into default and fea-
tures that are subject to mandatory licensing will suffer from reduced functionality.
The new license key (see step 12) must be used to achieve valid licensing. Section
8.2.4 describes the procedure for distributing licenses with HiPath 3000/5000 Man-
ager E.
8-30
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation