Table of Contents
Advertisement
boards.fm
Boards for HiPath 3000
Options
3.4.9
HOPE (for U.S. only)
Introduction
The HOPE (Hicom Office PhoneMail Entry) board provides Hicom Office PhoneMail Entry func-
tions.
The HOPE board does not identify itself to the system and is therefore not visible in
>
the HiPath 3000/5000 Manager E card map. When expanding a system (such as Hi-
Path 3350 or HiPath 3550), ensure that a free slot is available.
Interfaces
LED status indicator
Software load/diagnostic button
Digital station connector
(Off—towards LED
On—towards slot)
Figure 3-139
HOPE (for U.S. only) (S30122-Q7078-X; S30122-Q7079-X)
Board components
The following list describes the purpose of the components on the HOPE board:
The LED status indicator signals the state of the Hicom Office PhoneMail system
●
The software load/diagnostic button is for software loads (for example, loading a specific
●
language).
The digital station connector connects the HOPE board to the corresponding digital ports,
●
using a modular cable
3-376
On/off switch
PCMCIA slot
Card ejector
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Hide quick links:
Advertisement
Table of Contents
