Nur für den internen Gebrauch
9.1.3.2
Components
Powerbox PB3000 housing: S30177-U773-X
●
including assembly kit for 19-inch cabinet installation (C39165-A7027-D1)
Assembly kit for the wall attachment or desk installation of the PB3000 (optional):
●
C39165-A7027-D2.
Can be ordered as required with the following separate component:
LM/PHW: L30251-U600-A170, PST number: DUA170, "Wall bracket for HiPath 3300/3500
and Powerbox 3000"
Power supply cable (to be ordered separately):
●
EU:
Switzerland:
Britain:
Australia:
Euro:
Brasil:
4 x 12-V/7-Ah batteries: 4 x V39113-W5123-E891 (optional)
●
Power supply LUNA2: S30122-K7686-M1 (optional)
●
The LUNA2 has to be set to mode 2a to work probably with a Power Box PB3000. How to
set the LUNA2 mode, please refer to Section 3.2.12, "LUNA2".
Connection cable for PB3000, with batteries and LUNA2
●
Depending on the system, one of the following connection cables is used in addition to the
cable C39195-A7985-B38:
–
HiPath 3500, HiPath 3300: PB3000 is connected via connection cable C39195-A7985-
B24
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
C39195-Z7001-C11
C39195-Z7001-C38
C39195-Z7001-C32
C39195-Z7001-C57
C39195-Z7001-C46
For HiPath 3350 and 3550:
C39195-Z7001-C121 (IEC 60320 jack, straight)
For HiPath 3300, 3500 and 3800:
C39195-Z7001-C191 (IEC 60320 jack, 90° right-angled)
Expanding and Upgrading HiPath 3000
HiPath 3000Expanding
exup.fm
9-9