Siemens HiPath 3000 Series Service Documentation page 443

Table of Contents

Nur für den internen Gebrauch

Administration of the CAS protocol converter

A separate tool, the CAS Manager, is used to download the software and administer the TM-

CAS-2. The CAS Manager software is stored on a CD supplied with the card. For information

on how to install the CAS Manager software on the Service PC, refer to the readme file.

The following options are available for accessing the card:

Via the V.24 interface (9-pin MINI DIN jack X803) and the connection cable C39195-

Via the Ethernet (10/100BaseT) interface (RJ45 jack X804).

Via the optional analog modem (S30122-X8004-X22). In this case, you will need to estab-

lish a connection from the analog modem to a free port on an analog subscriber line mod-

ule. Use a connection cable (open-end cable (24 DA)) for the connection Backplane (TM-

CAS-2) <-> Main distribution frame/Patch panel: Use S30267-Z196-A150 = 15 m in length,

S30267-Z196-A250 = 25 m in length) (blue in Figure 3-106). Insert the required jumpers in

the main distributor frame or patch panel (green in Figure 3-106).

scriber line

Analog trunk

Main distributor frame / patch panel

Figure 3-106

TMCAS-2 (for selected countries only) – Connection Options for Card Admin-

istration using CAS Manager

A31003-H3590-S100-7-7620, 06/2012

HiPath 3000/5000 V9, Service documentation

Boards for HiPath 3000

V.24 interface

Ethernet (10/100BaseT) interface

Peripheral boards

Show Quick Links

Table of Contents