Siemens HiPath 3000 Series Service Documentation page 743

Table of Contents

Nur für den internen Gebrauch

HiPath 3800 as a GW, Procedure for System Installation and Startup

Making Trunk Connections

Refer to the following board descriptions for information:

STMD3 - for S

DIUN2 - for S

DIU2U (for U.S. only) - for T1 PRI trunk

DIUT2 - for the S

Making IP connections

Perform the IP connection over the HG 1500 board, STMI2.

For information on configuration, refer to the HG 1500 Administration Manual.

Performing a Visual Inspection, page 4-83

Startup of HiPath 3800 (Section 5.1)

Supplying the System with Power, page 5-2

(Plugging in the system cabinet(s) -> starting system boot)

Note (for Brazil only): The AC power of a system cabinet is internally equipped with

transient overvoltage protection up to approx. 2kV. Since additional lightning pro-

tection is prescribed for Brazil, the AC power of the system cabinet(s) must be con-

ducted through the outlet strip with overvoltage protection (part number C39334-

Z7052-C33). In this way, transient overvoltage protection is guaranteed up to ap-

Carrying Out a System Reload, page 5-6

Carrying Out the Country Initialization and Selecting the Password Type, page 5-7

Not for U.S.: Entering the System Number, page 5-9

Conducting customer-specific programming with HiPath 3000/5000 Manager E.

Refer to the HiPath 3000/5000 Manager E Help for information on programming in-

dividual features.

A31003-H3590-S100-7-7620, 06/2012

HiPath 3000/5000 V9, Service documentation

Activity (Remarks)

trunk connection

trunk connection and the T1 trunk connection (PRI or an-

Starting HiPath 3000 as a Gateway

Starting HiPath 3800 as a Gateway

Show Quick Links

Table of Contents