Siemens HiPath 3000 Series Service Documentation page 826

wclient.fm
Workpoint Clients
Key Programming, page 10-107
●
Key Modules for optiPoint 410/410 S and 420/420 S, page 10-71
●
– optiPoint self labeling key module
– optiPoint 410 display module
– Possible Configurations for the Key Modules
Use of optiPoint 500 Adapters, page 10-74
●
Central Administration of IP Workpoints via the System, page 10-75
Plug&Play Startup of IP Workpoints, page 10-76
●
Software Upgrade of IP Workpoints via the System, page 10-77
●
optiPoint 600 office, page 10-79
optiPoint 500, page 10-81
optiPoint 500 Telephones, page 10-82
●
– optiPoint 500 entry
– optiPoint 500 economy (not for U.S.)
– optiPoint 500 basic
– optiPoint 500 standard, optiPoint 500 standard SL (for U.S. only)
– optiPoint 500 advance
– Connection Requirements for HiPath 3000
– Connection
– Ports on the Bottom of the Telephone
– USB 1.1 Interface
optiPoint 500 Add-On Devices, page 10-93
●
– optiPoint key module
– optiPoint BLF
– Possible Configurations for the Key Modules
optiPoint 500 Adapters, page 10-95
●
– optiPoint analog adapter
– optiPoint ISDN adapter
– optiPoint phone adapter
– optiPoint acoustic adapter
– optiPoint recorder adapter
– Possible optiPoint Adapter Configurations
optiPoint 500 key modules and adapters power supply, page 10-105
●
Maximum Configuration for U
●
page 10-106
10-2
Topic
Workpoint Clients, Add-On Devices and Adapters,
P0/E
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation