Siemens HiPath 3000 Series Service Documentation page 270

boards.fm
Boards for HiPath 3000
Peripheral boards
Step
9. Close the system.
CAUTION
7
Cuts caused by sharp edges on the shielding plate
When opening the system, ensure that you only touch the housing cover from the
outside.
10. Start the system by plugging in the power plug. If using a UPS, the battery voltage
must also be switched on.
Figure 3-49 SLAD16 - Installation of the Fan Kit in HiPath 3550
3-138
[A]
[D]
Activity
[B]
[C]
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch