Siemens HiPath 3000 Series Service Documentation page 669

Nur für den internen Gebrauch
Procedure: Reinitialization
Proceed as follows if measures to expand the system configuration require reinitialization of
the numbering plan:
Step
1. Disconnect the system from
the power supply. Check that
the system is de-energized.
Expand as required.
2. Connect system to power sup-
ply
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Activity Description
A continuous numbering plan is generated (as was
the case when the system was first initialized).
Notes:
Changes to the extension numbers result in
●
changes to the individual, extension-specific
data.
Only those ports provided for in accordance
●
with the maximum configuration are activated if
the maximum line configuration is exceeded
(too many trunk boards).
A mixture of subscriber line circuits and trunk
●
lines on one S
0
numbering. This is because all S
tially activated as trunks and are only subse-
quently reconfigured.
Starting Up HiPath 3000
Starting Up HiPath 3800
board can result in gaps in line
ports are ini-
0
start_h3.fm
5-5