Table of Contents
Advertisement
Nur für den internen Gebrauch
15. Mount the HiPath system on the wall again.
16. Attach the cable connectors again onto the motherboard, expansion cards and the optional
modules.
17. Reconnect the power cord and start the system.
4.2.5.2
Replacing the Backplane for HiPath 3300/3500 (19" Rack)
To replace the backplane, proceed as follows:
1.
Dconnect the HiPath system by unplugging the power cord from the wall socket.
2.
Remove the cable connectors from the motherboard, the expansion cards and the optional
modules.
3.
Pull out the HiPath system pull from the rack and remove the cover.
4.
Remove the motherboard, expansion cards and the optional modules.
5.
Remove the UPSC-DR power supply from the HiPath system:
Figure 4-73
a) Remove the fan from the backplane.
b) Disconnect the power plug from the UPSC-DR power supply.
c)
Remove the PB 3000 connector from the housing.
d) Unscrew the UPSC-DR power supply .
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Installing HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300
HiPath 3500 after removing the motherboard, expansion cards and option-
al modules, and with instructions for removing the UPSC-DR power supply
inst_h3.fm
Installing HiPath 3000
4-129
Hide quick links:
Advertisement
Table of Contents
