Effects Of Hardware Changes On Customer Data; Inserting And Removing Hipath 3000 Boards - Siemens HiPath 3000 Series Service Documentation

service.fm
Service
Service and Maintenance Tasks
12.3.2

Effects of Hardware Changes on Customer Data

Any changes to the hardware must be made before creating a copy of the customer database
using HiPath 3000/5000 Manager E. You must ensure that the hardware configuration on the
MMC of HiPath 3000 is always current.
Hardware changes include:
removing or inserting boards (HiPath 3000 only).
●
removing or inserting telephones.
●
removing or inserting add-on devices or adapters.
●
12.3.2.1

Inserting and Removing HiPath 3000 Boards

Caution
7
When using HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300, disconnect
the system from the power supply before removing or inserting boards.
Only HiPath 3800 peripheral boards can be removed or inserted during operation.
Startup Rules for Inserting and Removing Boards
Table 12-1 Startup Rules for Inserting and Removing Boards
If
Inserting new board in
free slot
Replacing board with
same or underequipped
board type
12-22
The board is integrated into the system according to the rules for
initial startup (see Chapter 4, "Installing HiPath 3000").
System with default numbering plan
●
The station numbers from the new board are appended (con-
secutively and in ascending order) to the numbers already as-
signed.
System with modified numbering plan
●
The station numbers on the new board can be in any order.
Using HiPath 3000/5000 Manager E or Assistant T, you can assign
a specific station to a port. If the number is already assigned to a
different object, you can switch both numbers.
Board is activated. The same station range is used.
Nur für den internen Gebrauch
Then
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation