Tmgl4R (For U.s. Only) - Siemens HiPath 3000 Series Service Documentation

boards.fm
Boards for HiPath 3000
Peripheral boards
3.3.43

TMGL4R (for U.S. only)

NOTE
>
Danger of damage to property due to surge voltage. The required lightning protec-
tion measures must be taken for this board, see Section 2.1.2, "Lightning Protec-
tion".
Introduction
A TMGL4R trunk module connects up to four analog ground-start or loop-start trunks to HiPath
3500 and HiPath 3300.
Ground start is the default.
Interfaces
To ANI4R
To trunk 1
:
:
:
To trunk 4
To GEE
Figure 3-115 TMGL4R (for U.S. only) (S30810-K2918-Z)
If ANI4R is installed as option 1 or 2, TMGL4R board must be inserted in slot 4, 6 or
>
8 (slots 6 and 8 are not available with HiPath 3300).
3-336
1
X5 (MW10 jack)
11
X4 (4 MW4 jacks)
44
X3
Nur für den internen Gebrauch
50
X1
2
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
to CUPR/
CUCR