Table of Contents
Advertisement
Nur für den internen Gebrauch
12.4.2.3
Peripheral boards
Viewing peripheral board status
You can use HiPath 3000/5000 Manager E or Assistant T to view the status of all peripheral
boards. Display is limited to the following statuses per board:
Board not inserted
●
Board defective (not loaded)
●
Board disabled
●
Board enabled (active)
●
Board busy (at least one station or line from this board is disconnected, is being called, or
●
is busy).
For ISDN boards, the status of the reference clock is displayed:
No reference clock
●
Reference clock for clock generator is created.
●
When viewing the board status using the HiPath 3000/5000 Manager E, all peripheral boards
integrated into the system are presented in a table. The status display is updated every 3 sec-
onds.
With Assistant T, you can only view the status of one board at a time. You can also update the
status display by pressing a key.
You cannot perform additional activities with the HiPath 3000/5000 Manager E and Assistant T
while viewing the status of a board.
Table 12-4
HiPath 3000/5000 Manager E - Example of Status Display of Peripheral
Boards
Slot
Board
1
STLS2
2
SLU8
3
SLA4
4
TLA8
5
6
7
TS2N
8
16SLA
9
10
SLMO24
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Not
Defective
inserted
X
X
X
Blocked
Free
X
X
X
X
X
X
service.fm
Service
Guided Maintenance
Res.
Clock
source
X
X
12-39
Hide quick links:
Advertisement
Table of Contents
