Siemens HiPath 3000 Series Service Documentation page 1045

Nur für den internen Gebrauch
Table 12-7 HiPath 3000 Class B Error Messages
No. HiPath 3000/
5000 Manager E:
Event Log Entry
15-004 !APS switched
back def. KDS
15-005 !APS switched
back old KDS
15-006 !APS Transfer
disconnected
15-007 !Country-text
transferred
15-008 !Error by deleting
MMC
15-009 !Blck_length err
apsxf/ctxt
15-010 !Rest_length err
apsxf/ctxt
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Meaning
APS transfer was
not successful.
Default CDB load-
ed.
APS transfer was
not successful.
Old CDB loaded.
APS transfer inter-
rupted.
Country-specific
texts successfully
transferred.
Shadow APS can-
not be deleted.
Block length error
during country-
specific text trans-
fer.
Remaining length
error during coun-
try-specific text
transfer.
Required Measures
Load stored CDB onto the
system.
Check APS version.
Provide snapshot and
stack dump for analysis.
Restart APS transfer or
perform a speed upgrade.
If the error persists, re-
place the MMC module.
Load stored CDB onto the
system.
Check APS version.
Provide snapshot and
stack dump for analysis.
Restart APS transfer or
perform a speed upgrade.
If the error persists, re-
place the MMC module.
Check the transmission
link and interface.
Restart APS transfer.
None
Check APS version.
Restart APS transfer.
If the error persists, re-
place the MMC module.
Check the transmission
link and interface.
Transfer APS again.
Check the transmission
link and interface.
Transfer APS again.
service.fm
Service
Guided Maintenance
Note
An error oc-
curred while
starting up the
new APS. The
system has
switched back to
the old APS. As
a result, the CDB
was set to "De-
fault".
An error oc-
curred while
starting up the
new APS. The
system has
switched back to
the old APS.
12-71